Mumble features various Audio Options and Features, this wiki page will describe them and tell you which settings are best for your setup.
Audio Input - Options
If enabled, this will filter echo from the audio streams you send to others.
1. Normal loudspeakers and no headset:
This Setup will usually create echo, so you will need echo cancellation.
2. Headset transmits echo, though it shouldn't:
Some Headsets tend to transmit echo, the reasons for this include: bad cable and noise isolation or the microphone is to close to the loudspeakers of the headset.
Two options are implemented:
|1. Mixed echo cancellation||This is the basic Option: It will process all loudspeaker outputs bundled together.
This is less accurate than the Multichannel option, but will also use less CPU.
|Sufficient for setups with loudspeakers near to the microphone.|
|2. Multichannel echo cancellation||Extended option: It will process all audio channels seperately, this is more accurate, but will result in higher CPU usage.||For setups with (multiple) loudspeakers farther away from the microphone.|
In case of doubt:
1. Try Mixed echo cancellation first.
2. If Mixed echo cancellation does not filter the echo correctly, try Multichannel echo cancellation.
You can also use external echo filters, in this case deactivate the echo filters in mumble.
Examples for external echo filters:
RNNoise is a noise suppression library.
It is intended to filter background noises from the audio that is sent to other participants.
More information can be found on various websites: