Difference between revisions of "BuildingWindows"

From Mumble Wiki
Jump to: navigation, search
m
(Blanked the page)
Line 1: Line 1:
= Introduction =
 
  
Mumble has quite a few dependencies for building on Windows, and as the feature set grows, so does the list of dependencies. This page will try to detail the steps required to set up a Win32 build environment suitable for compiling the current code found in our repository. Be aware that this steps might not work for older revisions of Mumble as dependencies might have been removed or updated to an incompatible version in the meantime. '''Note that you must follow each step in order, or you will have problems.'''
 
 
The paths used here equal the defaults assumed in the Mumble build files. You are free to change them, but you might need to adjust the build files themselves. If you find any problems or incorrect steps in this article please either correct them or contact us and we will try our best to resolve the issue.
 
 
Also note, that if you are submitting a bug report for a self-built executable, we expect you to either
 
* Follow these instructions to the letter
 
or
 
* Report any deviations from these instructions
 
 
Deviations means anything, from "I installed to the D: drive" to "I changed the gcc build options for Qt" or "I used another version of Speex".
 
 
= Preparations =
 
 
== Visual Studio ==
 
 
You'll need Visual Studio 2008 (or Visual C++ Express Edition) with SP1.
 
 
Visual Studio 2008 Professional 90 day trial: http://msdn2.microsoft.com/en-us/vs2008/products/cc268305.aspx
 
 
Visual C++ Express Edition: http://www.microsoft.com/express/vc/ (Look at the bottom right corner for "Visual C++ 2008.")
 
 
==Intel C++ Compiler==
 
 
You can also use the Intel C++ Compiler in conjuction with VS2008. You can find it here: http://www.intel.com/cd/software/products/asmo-na/eng/368972.htm
 
 
'''This is strictly optional and you can compile a perfectly working version of Mumble without this compiler''' following this guide. '''This guide does not give information on how to use the Intel compiler with VS2008 to compile Mumble,''' so you will need to either have the programming experience necessary to know how to do this or find the procedures to do so elsewhere.
 
 
== Git ==
 
 
Download the most recent Git from http://code.google.com/p/msysgit/downloads/list and install it. Make sure you select "Run Git from the Windows Command Prompt."
 
 
== ActivePerl and NASM ==
 
 
Download and install ActivePerl from here: http://www.activestate.com/activeperl/<br>
 
 
Download and install NASM from here: https://sourceforge.net/projects/nasm/
 
 
== TortoiseSVN ==
 
 
Download the most recent version of TortoiseSVN at http://tortoisesvn.net/downloads and install it. The defaults are fine.
 
 
'''Note:'''
 
TortoiseSVN is only need to checkout the SVN of WinDBus. You can skip this step.
 
 
 
== Bonjour ==
 
Download the bonjour sdk from http://developer.apple.com/networking/bonjour/download/ and install it to ''c:\dev\Bonjour\'' .
 
 
'''Note:''' Bonjour can be disabled by passing ''CONFIG+=no-bonjour'' to qmake.
 
 
== G15SDK ==
 
Download the G15 software from here: http://www.logitech.com/index.cfm/434/180&cl=us,en?WT.ac=sc|downloads||dd and install it.
 
 
Now go to ''C:\Program Files\Logitech\GamePanel Software\LCD Manager\SDK'' and extract "LCDSDK_3.02.173.zip". Take the folder that has been extracted and rename it to ''G15SDK''. Put this folder into ''c:\dev''.
 
 
'''Note:''' Support for G15 Displays can be disabled by passing ''CONFIG+=no-g15'' to qmake.
 
 
== libsndfile ==
 
Download the Win32 binary release from http://www.mega-nerd.com/libsndfile/#Download and install it to ''c:\dev\libsndfile\'' . Make sure the libsndfile-1.dll is visible to the executables.
 
 
'''Note''': This dependency is not needed for the server.
 
 
== libogg ==
 
Download the latest libogg-1.x.x.zip from http://downloads.xiph.org/releases/ogg/ and unpack it to ''c:\dev\libogg''.
 
 
If you want to compile Mumble 1.1.x, you need to go to ''C:\dev\libogg\win32\VS2008'', start the libogg_dynamic project, then build the release builds of libogg. Copy ''C:\dev\libogg\win32\VS2008\Win32\Release_SSE2\libogg.lib'' to the new folder ''C:\dev\libogg\lib\''.
 
 
'''Note:''' This dependency is not needed if you do not want to compile the Mumble compatibility client (Mumble 1.1.x). The Mumble compatibility client can be disabled by passing ''CONFIG+=no-11x'' to qmake. This dependency is not needed for building the server.
 
 
== Microsoft Windows SDK ==
 
 
Go here to download: http://www.microsoft.com/downloads/details.aspx?FamilyID=c17ba869-9671-4330-a63e-1fd44e0e2505&displaylang=en . At the time of this writing, the latest version is the "Microsoft Windows SDK for Windows 7 and .NET Framework 3.5 SP1". Install it to ''C:\dev\WinSDK''
 
 
As you are going through the installer you will come to a window where you will see two main categories and then subcategories below them. Uncheck the green check boxes next to “Documentation” and “Samples”. Continue with the installation. These take a long time to download and are not really needed for Mumble.
 
 
== Microsoft DirectX SDK ==
 
 
Go to http://msdn.microsoft.com/directx/sdk/ and download the latest SDK. Install it to ''c:\dev\DXSDK''
 
 
== MySQL ==
 
 
Download the latest release of MySQL Server. It can be found here: http://dev.mysql.com/downloads/mysql/5.1.html#win32 (select "Without installer (unzip in C:\)"). Unzip it to ''c:\dev\MySQL''.
 
 
== Protocol Buffers ==
 
 
Download Protocol Buffers from [http://code.google.com/p/protobuf/ Google] (''protobuf-x.y.z.zip'')  and unpack it to ''c:\dev\protobuf-z.y.z''. Follow the documentation in ''c:\dev\protobuf-x.y.z\vsprojects\readme.txt''. Note that if the release number changes you will need to change prep.bat to whatever ''z.y.z'' changed to or you won't be able to call ''protoc.exe''.
 
 
== Visual Leak Detector ==
 
 
[http://dmoulding.googlepages.com/vld Download] VLD and install it to ''C:\dev\vld\''.
 
 
If you're using Visual C++ Express Edition, you will need to manually extract the files using a tool like [http://7-zip.org/ 7-zip ]. Extract it to ''C:\dev\'' and rename it to ''vld''.
 
 
'''Note:''' VLD is only enabled for debug builds.
 
 
== ZeroC Ice ==
 
 
Download the latest version of ZeroC Ice from http://www.zeroc.com/download.html and make sure you select the VS2008 version. Install to ''c:\dev\Ice''
 
 
'''Note:''' Ice can be disabled by passing ''CONFIG+=no-ice'' to qmake. Bear in mind that the [[Ice]] RPC Interface is the recommended way to control the server. This dependency is not needed for building the client.
 
 
==Create the bat file==
 
 
Create ''C:\dev'', and inside that directory create a file ''prep.bat'' containing:
 
@echo off
 
SET QTDIR=C:\dev\QtMumble
 
SET DBUSDIR=C:\dev\dbus
 
SET LIB=
 
SET VLD_DIR=C:\dev\vld
 
SET MYSQL=c:\dev\mysql
 
SET ICE=c:\dev\Ice
 
CALL "%DXSDK_DIR%\Utilities\bin\dx_setenv.cmd" x86
 
IF DEFINED "%PROGRAMFILES(X86)%" (
 
CALL "%PROGRAMFILES(X86)%\Microsoft Visual Studio 9.0\VC\vcvarsall.bat" x86
 
) ELSE (
 
CALL "%PROGRAMFILES%\Microsoft Visual Studio 9.0\VC\vcvarsall.bat" x86
 
)
 
SET PATH=%QTDIR%\bin;%DBUSDIR%\bin;c:\dev\OpenSSL\bin;c:\dev\libsndfile;c:\dev\cmake\bin;%MYSQL%\lib\opt;%ICE%\bin;c:\dev\protobuf-2.2.0\vsprojects\Release;%PATH%;C:\Program Files (x86)\NASM
 
change the last line to
 
SET PATH=%QTDIR%\bin;%DBUSDIR%\bin;c:\dev\OpenSSL\bin;c:\dev\libsndfile;c:\dev\cmake\bin;%MYSQL%\lib\opt;%ICE%\bin;c:\dev\protobuf-2.2.0\vsprojects\Release;C:\dev\libogg\win32\VS2008\Win32\Release;%PATH%;C:\Program Files (x86)\NASM
 
if you're compiling Mumble 1.1.x along with Mumble 1.2.0.
 
 
Change Program Files (x86) to Program Files if you're on Win32.
 
 
Start a new command shell (run ''cmd.exe'') (Make sure you have Microsoft Visual C++ and Git installed before you run prep!)
 
cd \dev
 
prep
 
 
After you run prep make sure a message similar to "Setting environment for using Microsoft Visual Studio 2008 x86 tools" appears.
 
 
Whenever something appears
 
like this
 
you're supposed to enter it in that command shell (or copy it from this webpage and right click in the command window and select ''Paste''). When you later want to compile things, remember to call prep.bat first to set paths correctly.
 
 
Note to those following this guide: When you extract compressed files, sometimes they will have container folders and sometimes they will not. Please ensure (for example) that when you extract a compressed file like QT4.5.1, that you see "bin" "include" and such folders as that directly inside of the folder named "Qt4.5.1". If you just see one folder and no other files, you have done it wrong.
 
 
 
== Boost ==
 
 
Download http://prdownloads.sf.net/boost/boost_1_41_0.7z?download and http://prdownloads.sf.net/boost/boost-jam-3.1.17-1-ntx86.zip?download and unzip both to ''c:\dev''
 
 
cd \dev
 
prep
 
cd boost_1_41_0
 
copy ..\boost-jam-3.1.17-1-ntx86\bjam.exe
 
bjam --toolset=msvc --prefix=C:\dev\Boost install
 
 
This might take a while, but when done you'll have Boost installed.
 
Note that none of the other build dependencies do themselves depend on boost, so if you want you can just continue in a new command shell (but remember to call ''prep.bat''). Once all is done, you can safely delete the boost_1_41_0 and boost-jam directories. If you get the warning, that some targets were skipped or failed, it can be ignored for our purposes.
 
 
 
== WinDBUS ==
 
 
From http://www.winkde.org/pub/kde/ports/win32/repository/win32libs/ download the following archives:
 
 
* zlib*lib.zip
 
* zlib*bin.zip
 
* iconv*lib.zip
 
* iconv*bin.zip
 
* libxml2*bin.tar.bz2
 
* libxml2*lib.tar.bz2
 
 
Whereas * represents the newest version on the server. Unpack all of them to 'c:\Program Files\win32libs'. If you have extracted them all correctly you should see inside of 'c:\Program Files\win32libs' "include," bin," lib," and "manifest" folders. Note that you may also download the dbus library from there, but if you do it will not automatically spawn dbus-daemon as that needs patching.
 
 
Download [http://www.cmake.org/files/v2.6/cmake-2.6.3-win32-x86.zip CMake] and unpack it to c:\dev. Rename the top directory to just 'cmake'.
 
 
Checkout the SVN of WinDBus from https://windbus.svn.sourceforge.net/svnroot/windbus/trunk to c:\dev\windbus
 
 
If you skipped installing TortoiseSVN, download http://windbus.svn.sourceforge.net/viewvc/windbus/trunk.tar.gz?view=tar and extract the archive to ''c:\dev\''. Rename the extracted ''trunk'' folder to ''windbus''.
 
 
cd \dev
 
prep
 
mkdir windbus-build
 
cd windbus-build
 
cmake -DCMAKE_BUILD_TYPE=Release -DDBUS_INSTALL_SYSTEM_LIBS=ON -G "NMake Makefiles" c:\dev\windbus\cmake
 
nmake
 
nmake install
 
 
Regardless of what you say, Windbus is installed to ''c:\<Program Files>\dbus''. Move that entire directory into ''c:\dev'' (so it ends up as ''c:\dev\dbus'')
 
 
Copy all .dll files from ''c:\Program Files\win32libs\bin'' to ''c:\dev\dbus\bin''
 
 
You can remove the ''c:\dev\windbus'' and ''c:\dev\windbus-build'' directories at this point.
 
 
 
== OpenSSL ==
 
 
Download the OpenSSL source named "openssl-1.0.0-beta4.tar.gz" from here http://www.openssl.org/source/. Unpack it to ''c:\dev'' (it will create a directory called openssl-x.y.z)
 
 
Download [http://www.zlib.net/zlib-1.2.3.tar.gz zlib] and unzip it to C:\dev\zlib
 
 
cd \dev
 
prep
 
cd openssl<press tab>
 
perl Configure VC-WIN32 --prefix=c:\\dev\\OpenSSL zlib zlib-dynamic enable-static-engine -Ic:\\dev\\zlib
 
ms\do_nasm
 
nmake -f ms\ntdll.mak
 
nmake -f ms\ntdll.mak install
 
You can remove ''c:\dev\openssl-x.y.z'' after this.
 
 
 
== Qt ==
 
 
Checkout the Mumble Qt git repo to C:\dev\QtMumble.
 
cd \dev
 
prep
 
git clone git://gitorious.org/+mumble-developers/qt/mumble-developers-qt.git QtMumble
 
 
Switch to the 4.6-mumble branch:
 
 
cd QtMumble
 
git checkout --track -b 4.6-mumble origin/4.6-mumble
 
 
Start a regular command shell:
 
 
cd \dev
 
prep
 
cd QtMumble
 
 
The demos and examples need a lot of time and disk space. You can skip them.
 
Add the following parameter to the configure line listed below:
 
-nomake demos -nomake examples
 
This saves time, disk space, and nerves.
 
 
Now do
 
configure -debug-and-release -qt-sql-sqlite -qt-sql-mysql -no-qt3support -no-exceptions -qt-zlib -qt-libpng  -qt-libjpeg  -openssl -dbus-linked -I c:\dev\OpenSSL\include -L c:\dev\OpenSSL\lib -I c:\dev\dbus\include -L c:\dev\dbus\lib -I c:\dev\mysql\include -L c:\dev\mysql\lib\opt -platform win32-msvc2008
 
nmake
 
 
This will also take quite a while.
 
 
 
== Download Mumble and Submodules ==
 
 
To clone the repositories :
 
 
cd \dev
 
prep
 
git clone git://mumble.git.sourceforge.net/gitroot/mumble/mumble mumble
 
cd mumble
 
git submodule init
 
git submodule update
 
 
To use the v1.1.x branch (which you most likely do) run this command after running the commands above:
 
git checkout --track -b v1.1.x origin/v1.1.x
 
 
If you are using the current branch, you will need to open git bash and cd to the mumble folder that was created. Now cd to
 
src/mumble11x
 
and then do
 
sh mklinks.sh
 
 
 
= Building Mumble and Murmur =
 
 
Once all of the above is done we can get to compiling Mumble itself.
 
 
If you want to have ASIO support you have to install an additional, proprietary, ASIO SDK.
 
 
There are four dependencies that most people who make their own compiles will not need: g15, asio, bonjour, and 11x. The bonjour dependency is useful if you want to browse servers across a local network, but you can disable it if this feature is not needed.
 
 
To compile Mumble without Mumble 1.1.x, ASIO, G15, and Bonjour, replace the qmake command below with this one:
 
 
qmake CONFIG+=no-11x CONFIG+=no-asio CONFIG+=no-g15 CONFIG+=no-bonjour -recursive
 
 
To compile Mumble with Mumble 1.1.x, but without ASIO, Bonjour, and G15 replace the qmake command below with this one:
 
 
qmake CONFIG+=no-asio CONFIG+=no-bonjour CONFIG+=no-g15 -recursive
 
 
Note that the compile ''will fail'' if you leave out these build flags and do not have the SDK required.
 
 
To compile Mumble:
 
 
Open a new command prompt, then do
 
 
cd \dev
 
prep
 
cd mumble
 
qmake
 
nmake clean
 
nmake
 
 
Note that this builds the debug versions, which is what we strongly recommend to use while developing. If you want to send the binary to someone else, use
 
nmake release
 
instead of the  last
 
nmake
 
command listed above. This will result in a much smaller binary with fewer dependencies.
 
 
 
= Running Mumble and Murmur =
 
 
Once compiled, you can go into ''c:\dev\mumble\release'' or (''\debug'' if you compiled the debug version) and can execute mumble.exe or murmur.exe. Before executing Mumble or Murmur you need to open a command prompt and do
 
cd \dev
 
prep
 
cd mumble\debug (or release)
 
Then execute either Mumble or Murmur ''from the command prompt'' with
 
mumble.exe
 
or
 
murmur.exe
 
 
If you want to run the release build directly from Windows Explorer, you will need to collect all the library files into one folder, along with the executables you built when you compiled Mumble. Have a look at the files the official Mumble installer creates in ''Program Files\Mumble'' to find out which files you will need.
 
 
[[Category:Development]]
 

Revision as of 07:11, 28 December 2009