Difference between revisions of "Ice"

From Mumble Wiki
Jump to: navigation, search
(Building Ice on Redhat/CentOS machines)
m (Changing PHP scripts)
(41 intermediate revisions by 7 users not shown)
Line 1: Line 1:
Murmur supports remote scripting using [http://www.zeroc.com/ ZeroC Ice], a RPC mechanism. There are bindings for C++, Java, .NET, Python, PHP and Ruby, and this is supported on all our platforms (Win32, Linux and OSX). Ice also works over a network, meaning you can create a web application that interfaces with a Murmur process running on another machine.  
+
Murmur supports remote scripting using [http://www.zeroc.com/ ZeroC Ice], a RPC mechanism. There are bindings for C++, Java, .NET, Python, PHP and Ruby, and this is supported on all our platforms (Win32, Linux and OSX). Ice works locally and also over a network, meaning you can create a web application that interfaces with a Murmur process running on another machine.
 
 
'''All hosters note: local ICE connections have now been secured, without having to use Glacier, in Murmur 1.2.2. Simply use the icescret= parameter in your ''murmur.ini''. [http://mumble.git.sourceforge.net/git/gitweb.cgi?p=mumble/mumble;a=blob_plain;f=scripts/murmur.ini;hb=5cd6a1be959005191423372847bb7f3dcd7c5c59 Here] is the latest ''murmur.ini'' describing the icesecret setting. Note you must also have Murmur 1.2.2 or greater as well.'''
 
  
 
= Getting ready to use Ice =
 
= Getting ready to use Ice =
  
To enable Ice in your ''murmur.ini'' configuration file first comment out
+
To enable the Ice interface in your ''murmur.ini'' configuration file for ''localhost'' on port ''6502'' add or uncomment:
dbus=session
 
to disable dbus and add / uncomment
 
 
  ice="tcp -h 127.0.0.1 -p 6502"
 
  ice="tcp -h 127.0.0.1 -p 6502"
to enable Ice for localhost on port 6502.
 
  
To check if Ice in fact does listen, on unix type
+
Now restart Murmur so the change takes effect.
 +
 
 +
To check if Ice in fact does listen, on UNIX type:
 
  netstat -apn | grep 6502
 
  netstat -apn | grep 6502
on windows type
+
and on Windows type:
  netstat -an | grep 6502
+
  netstat -an  
 +
and look for the process listening on port ''6502''.
 +
 
 +
If the port is not being listened on, check Murmurs log. It should state enabling ice on startup. If it does not, something of your configuration went wrong.
 +
MurmurIce: Endpoint "tcp -h 127.0.0.1 -p 6502" running
  
 
= End User Howtos =
 
= End User Howtos =
  
Note that after you have ICE set up on your machine, you can install a [http://mumble.sourceforge.net/Running_Murmur#Web-Interfaces web interface]. [http://www.mumb1e.de/ Mumb1e Admin Plugin] or [https://sourceforge.net/projects/mumpi/ MumPI] are webinterfaces that requires minimal server configuration and be easy to use.
+
Note that after you have ICE set up on your machine, you can install a [[3rd_Party_Applications#Web-Interfaces|web interface]].
  
== How to setup Ice for PHP with Apache on Linux (general) ==
+
How to convert Murmur.ice to Murmur.php for Ice >= 3.4.0 : http://doc.zeroc.com/display/Ice/slice2php+Command-Line+Options
If your Linux distribution offers a binary packet for Ice with php (usually the name contains Ice and php) you can skip everything but naming the Murmur.ice slicer file in the php.ini (see below). If there is no prepared package you'll have to try to find binaries for your system or [[Ice#Compiling_Ice|compile]] Ice yourself and add the extension to php and tell php where to find the Murmur.ice file.
 
  
To add the IcePHP extension to php, first check that the file IcePHP.so for linux is in your php extensions folder specified in your php.ini as  
+
== How to setup Ice 3.4 for PHP with Apache on Linux (general) ==
 +
If your Linux distribution offers a binary packet for Ice with PHP (usually the name contains Ice and php) you can skip everything but naming the Murmur.ice slice file in the php.ini (see below). If there is no prepared package you'll have to try to find binaries for your system or [[Ice#Compiling_Ice|compile]] Ice yourself and add the extension to PHP and tell PHP where to find the Murmur.ice file.
 +
 
 +
To add the IcePHP extension to PHP, first check that the file IcePHP.so for linux is in your php extensions folder specified in your php.ini as  
 
  extension_dir = /usr/lib/php5/extensions
 
  extension_dir = /usr/lib/php5/extensions
If it is not, get the correspoding files from [http://www.zeroc.com/download.html ZeroCs downloads page].
+
If it is not, get the corresponding files from [http://www.zeroc.com/download.html ZeroC's downloads page].
  
 
Then either in your php.ini file or in your /etc/php.d or /etc/php5/conf.d folder in ice.ini, add the line
 
Then either in your php.ini file or in your /etc/php.d or /etc/php5/conf.d folder in ice.ini, add the line
 
  extension=IcePHP.so
 
  extension=IcePHP.so
At least the linux rpms will do this automatically, so check that you're not doing it a second time.
+
At least the Linux RPMs will do this automatically, so check that you're not doing it a second time.
  
 
Second, you have to tell the PHP parser where to find the slice ('''S'''pecification '''L'''anguage for '''Ice''') file.
 
Second, you have to tell the PHP parser where to find the slice ('''S'''pecification '''L'''anguage for '''Ice''') file.
 
Add
 
Add
 
  ice.slice = /path/to/Murmur.ice
 
  ice.slice = /path/to/Murmur.ice
to your php.ini or other config file (ice.ini).
+
to your php.ini or other config file (e.g. ice.ini).
  
 
=== Troubleshooting ===
 
=== Troubleshooting ===
If you encounter problems, check your apache log.
+
If you encounter problems, check your Apache log.
  
If it tells you the php extension was compiled on an older api, you have to compile the IcePHP.so from source.
+
If it tells you the PHP extension was compiled on an older api, you have to compile the IcePHP.so from source.
  
Download Ice-3.3.0.tar.gz from [http://www.zeroc.com/download.html ZeroCs downloads page], untar, cd, cd into php, as written in the INSTALL file export  ICE_HOME environment variable pointing to your ice install dir. If you installed it with an rpm, type
+
Download Ice-3.4.2.tar.gz from [http://www.zeroc.com/download.html ZeroCs downloads page], untar, cd into PHP, as written in the INSTALL file export  ICE_HOME environment variable pointing to your Ice install dir. If you installed it with an RPM, type
 
  export ICE_HOME=/usr
 
  export ICE_HOME=/usr
 
then make, and in the lib folder, there'll be your IcePHP.so file.
 
then make, and in the lib folder, there'll be your IcePHP.so file.
Line 54: Line 57:
 
and perform the substitution mentioned.
 
and perform the substitution mentioned.
  
== How to setup Ice for PHP with Apache on Debian ==
+
== How to Setup Ice for PHP with Apache on Debian/Ubuntu ==
  
These are example scripts. Use at your own risk.
+
'''Note:''' For the '''PHP Ice''', there are major differences between the Ice versions 3.3 and 3.4. In more detail: 3.3 uses ''.ice'' definition files while 3.4 uses compiled/converted PHP files.
  
'''This guide is for debian 5.0 (lenny) -upgraded to date 06.04.2009-'''
+
Thus, depending on the version you are installing, you will have to follow different configuration steps.
  
I assume you already have a working apache2 and php environment.
+
At the moment [2012.05.06], the current Debian stable is ''squeeze'', for which the official repositories provide version the ''Ice 3.3''. For Ubuntu on the other hand, the current stable version ''12.04'' (LTS) provides ''Ice 3.4'' in its repositories. So '''make sure you follow the matching instructions'''.
  
 +
'''Short, expert version''':
 +
* If php-zeroc-ice version >= 3.4: ''<code>apt-get install php-zeroc-ice</code>'', then add <code>/usr/share/Ice-3.4.2/php/lib</code> to your PHPs ''include path''.
 +
* If php-zeroc-ice version <= 3.3: ''<code>apt-get install php-zeroc-ice</code>'', then add the <code>ice.slice</code> parameter to with value <code><pathto>/murmur.ice</code> to your PHPs configuration.
  
'''Prerequisites'''
 
  
First we need some essentials to aquire these execute the following in a root shell
+
For the following guide, a set up Apache2 and PHP environment, and a working install of Murmur is assumed.
  
apt-get update
 
 
apt-get install mumble-server icecpp libzeroc-ice32 php-zeroc-ice lzma
 
  
These are namely the Mumble server himself (mumble-server), ZeroC Ice himself (icecpp), the ZeroC-Ice C++ runtime Library (libzeroc-ice32), the Ice PHP extension (php-zeroc-ice) and the lzma extractor.
+
''' Step 1 - PHP Ice extension'''
Be aware that this installs a older server version WITHOUT Ice support. We will fix this later on.
 
  
Additionally we need the current Murmur, thats what the Mumble server is called, release.
+
First we need to install the Ice library for PHP. Execute the following in a root shell:
  
Go to http://mumble.sourceforge.net/ and download the latest stable Static Linux Server. I suggest your home directory for that.
+
  apt-get update
  cd ~
+
   
  wget http://switch.dl.sourceforge.net/sourceforge/mumble/murmur-static_x86-1.1.8.tar.lzma
+
  apt-get install php-zeroc-ice
  unlzma -v murmur-static_x86-1.1.8.tar.lzma
 
tar xfv murmur-static_x86-1.1.8.tar
 
  
  
''' Step 1 - Murmur Setup'''
+
''' Step 2 - PHP Setup '''
  
OPTIONAL: To run Murmur at every startup change the config value in /etc/default/mumble-server acordingly with a editor of your choice.
+
Now we need to tell PHP to load the IcePHP extension.
 +
Open the file ''/etc/php5/apache2/php.ini'' for editing:
 +
vim /etc/php5/apache2/php.ini
 +
OR:
 +
nano -w /etc/php5/apache2/php.ini
 +
Paste the folowing in the dynamic extensions section of the file:
 +
extension=IcePHP.so
  
Now open the file /etc/mumble-server.ini
 
vim /etc/mumble-server.ini
 
OR
 
nano -w /etc/mumble-server.ini
 
Uncomemnt the line that starts with dbus=
 
#dbus=system
 
Create a new line and paste
 
ice="tcp -h 127.0.0.1 -p 6502"
 
Murmur now knows that he should listen for Ice requests.
 
  
 +
''' Step 3 - Reload and Check '''
  
''' Step 2 - Manual update Murmur '''
+
Everything should be set up so let's restart the servers so they load the updated config files.
  
First of all why did we installed a old version first to replace it now?
+
Restart your Apache2 daemon:
 +
/etc/init.d/apache2 restart
  
It's easy, we have much less to do. Anyway there is a downside.
+
Make a file named phpinfo.php in your web root and paste the following:
 +
<?php phpinfo(); ?>
 +
Open the page in your browser, you should be greeted with PHP's information page. Search the page for "Ice version" to verify that the IcePHP extension has loaded. If you don't see IcePHP's version and config info on this page, verify that the file IcePHP.so exists in PHP's ''extension_dir'' (this will also be in your PHP info page). Once you're sure that the IcePHP extension has loaded, delete the phpinfo.php file for security reasons.
  
When the package is updated in the repository you will probably break your Ice support. But i think thats the best way and you can easily fix that just with replacing the murmurd binary again.
+
Now we will take a look in the mumble-server log to see if Murmur's Ice interface is listening:
 +
tail -n10 /var/log/mumble-server/mumble-server.log
 +
If you find a line similar to the following everything is fine and you can now communicate to Murmur via its Ice interface.
 +
...
 +
<W>2012-03-24 13:37:11.316 MurmurIce: Endpoint "tcp -h 127.0.0.1 -p 6502" running
 +
...
  
You alread extracted the Static Linux Server to your home directory. Now we need some files from there.
+
''' Step 4 - Setting up Murmur to provide Ice interface '''
  
First replace the repository binary with the manually downloaded one.
+
Now open the file ''/etc/mumble-server.ini'' for editing:
  cd ~/murmur-static_x86-1.1.8
+
  vim /etc/mumble-server.ini
  chmod +x ./murmur.x86
+
OR:
  cp murmur.x86 /usr/sbin/murmurd
+
  nano -w /etc/mumble-server.ini
Now copy the Ice specification for murmur.
+
Comment the following line to disable [[DBus]]:
  cp Murmur.ice /var/lib/mumble-server/Murmur.ice
+
  #dbus=system
 +
Uncomment or paste the following line to enable the Ice interface:
 +
  ice="tcp -h 127.0.0.1 -p 6502"
  
 +
Restart your Mumble server:
 +
/etc/init.d/mumble-server restart
  
''' Step 3 - PHP Setup '''
+
After restarting the daemon Murmur will now listen for Ice requests.
Now we need to tell the PHP-Ice Extension where the Ice specification file can be found.
 
You should already have a file /etc/php5/conf.d/IcePHP.ini from your PHP module install.
 
Open it with a editor.
 
vim /etc/php5/conf.d/IcePHP.ini
 
OR
 
nano -w /etc/php5/conf.d/IcePHP.ini
 
Paste the folowing in a new line at the end of the file
 
ice.slice = /var/lib/mumble-server/Murmur.ice
 
 
  
''' Step 4 - Reload and Check '''
 
 
Everything needed should be done now let us populate your new settings.
 
 
Restart your apache2.
 
/etc/init.d/apache2 restart
 
And start your Mumble server
 
/etc/init.d/mumble-server start
 
Now we will take a look in the mumble-server log to see if everything is fine.
 
tail -n10 /var/log/mumble-server/mumble-server.log
 
If you find a line similar to the following
 
...
 
<W>2009-04-06 13:37:11.316 MurmurIce: Endpoint "tcp -h 127.0.0.1 -p 6502" running
 
...
 
everything is fine and you can now comunicate to Murmur over the IcePHP extension.
 
  
''' Again be aware of that you can break your Ice support when the package gets an update in the repository! '''
 
  
--[[User:xenonR|xenonR]] 13:02, 06 April 2009 (UTC)
+
Now you can install and use any of the PHP based [[3rd Party Applications]] compatible with IcePHP version 3.4.
  
 
== How to setup Ice for PHP with Apache on Windows ==
 
== How to setup Ice for PHP with Apache on Windows ==
Line 155: Line 139:
 
Now install [http://www.php.net/get/php-5.2.8-win32-installer.msi/from/us.php.net/mirror PHP]. Tell PHP to install to ''C:\PHP5\''. In the installer on the "Web Server Setup" window select Apache 2.2.x Module. When you get to "Select Apache Configuration Directory" put ''C:\apache\conf\''. Proceed through the installer. Install the defaults, you do not need to install the extensions for PHP.  
 
Now install [http://www.php.net/get/php-5.2.8-win32-installer.msi/from/us.php.net/mirror PHP]. Tell PHP to install to ''C:\PHP5\''. In the installer on the "Web Server Setup" window select Apache 2.2.x Module. When you get to "Select Apache Configuration Directory" put ''C:\apache\conf\''. Proceed through the installer. Install the defaults, you do not need to install the extensions for PHP.  
  
Now [http://zeroc.com/download.html download] and install Ice-''x.x.x''-VC60.msi. Go to ''C:\Ice-3.3.1-VC60\bin\'' and copy  
+
Now [https://zeroc.com/downloads/ice download] and install Ice-''x.x.x''-VC60.msi. Go to ''C:\Ice-3.3.1-VC60\bin\'' and copy  
 
  bzip2.dll  
 
  bzip2.dll  
 
  ice33.dll  
 
  ice33.dll  
Line 170: Line 154:
 
Now save and exit php.ini.
 
Now save and exit php.ini.
  
After you have done all that, download [http://mumble.svn.sourceforge.net/viewvc/mumble/trunk/src/murmur/Murmur.ice?view=log Murmur.ice], [http://mumble.svn.sourceforge.net/viewvc/mumble/trunk/scripts/icedemo.php?view=log icedemo.php], and [http://mumble.svn.sourceforge.net/viewvc/mumble/trunk/scripts/weblist.php?view=log weblist.php] (Click the links, and on the Sourceforge page right click on "(download)" and select "Save Link As...".) Put Murmur.ice in ''C:\PHP5''. Put icedemo.php and weblist.php in ''C:\apache\htdocs''.  
+
After you have done all that, download [[mumblegithub:/mumble/raw/1.2.8/src/murmur/Murmur.ice|Murmur.ice]], [[mumblegithub:/mumble/raw/1.2.8/scripts/icedemo.php|icedemo.php]], and [[mumblegithub:/mumble/raw/1.2.8/scripts/weblist.php|weblist.php]] (Click the links, and on the Sourceforge page right click on "(download)" and select "Save Link As...".) Put Murmur.ice in ''C:\PHP5''. Put icedemo.php and weblist.php in ''C:\apache\htdocs''.  
  
 
Double click the Apache icon in the system tray and select "Restart".
 
Double click the Apache icon in the system tray and select "Restart".
Line 176: Line 160:
 
You now need at least one running Murmur server. Go to C:\Program Files\Mumble and double click murmur.exe and the server will start.
 
You now need at least one running Murmur server. Go to C:\Program Files\Mumble and double click murmur.exe and the server will start.
  
You should now be able to go to http://<your IP or Domain>/icedemo.php (or weblist.php). Make SURE that you have icedemo.php protected so that only YOU can access it. If you do not want to use icedemo.php, [http://mumble.sourceforge.net/Running_Murmur#Web-Interfaces here] is a list of other web interfaces you can use.
+
You should now be able to go to http://<your IP or Domain>/icedemo.php (or weblist.php). Make SURE that you have icedemo.php protected so that only YOU can access it. If you do not want to use icedemo.php, [[3rd Party Applications#Web-Interfaces|here]] is a list of other web interfaces you can use.
  
== How to setup Ice for PHP with XAMPP on Windows - or the right way to use Ice on Windows ==
+
== How to setup Ice for PHP with XAMPP on Windows ==
  
 
=== pre Setup ===
 
=== pre Setup ===
 
Download and install the following packages:
 
Download and install the following packages:
 
* XAMPP for Windows http://www.apachefriends.org
 
* XAMPP for Windows http://www.apachefriends.org
* ZeroC Ice http://zeroc.com/download.html#win32_msi
+
* ZeroC Ice https://zeroc.com/downloads/ice
 
Now configure and start XAMMP.
 
Now configure and start XAMMP.
  
Line 218: Line 202:
 
  /etc/php5/ice/murmur.1.1.x
 
  /etc/php5/ice/murmur.1.1.x
 
  /etc/php5/ice/murmur.1.2.x
 
  /etc/php5/ice/murmur.1.2.x
* To each of the corresponding directory I have placed the Murmur.ice file provided with the installs. You will notice that later upgrades will just consit of copying new files (instead of renaming).
+
* To each of the corresponding directory I have placed the Murmur.ice file provided with the installs. You will notice that later upgrades will just consist of copying new files (instead of renaming).
 
* time to make profiles.ini file that ICE will use:
 
* time to make profiles.ini file that ICE will use:
 
  vi /etc/php5/ice/profiles.ini
 
  vi /etc/php5/ice/profiles.ini
Line 249: Line 233:
  
 
====Changing PHP scripts====
 
====Changing PHP scripts====
* Next alter the source code of the php scripts you use. It consists of just altering the one function that tells ICE to load profile. By default the function is ran without paramter, and it looks like below:
+
* Next alter the source code of the php scripts you use. It consists of just altering the one function that tells ICE to load profile. By default the function is ran without parameter, and it looks like below:
 
  Ice_loadProfile();
 
  Ice_loadProfile();
 
* Now we will tell that function to load specific profile that it was designed for. Below example modifications to load different profiles for given ice profile:
 
* Now we will tell that function to load specific profile that it was designed for. Below example modifications to load different profiles for given ice profile:
Line 261: Line 245:
 
* Remember to restart apache (your configuration may require it)
 
* Remember to restart apache (your configuration may require it)
 
* See php/apache error logs when something goes wrong.
 
* See php/apache error logs when something goes wrong.
* If you get erro like ''unknown operation getUsers invoked on proxy of type ::Murmur::Server'' then it means you use old Murmur.ice file. This happens whne you try to connect using Murmur.ice from version 1.1.x to Murmur server 1.2.x, which require Murmur.ice 1.2.x. Update Murmur.ice on web server and restart it and then it should work.
+
* If you get error like ''unknown operation getUsers invoked on proxy of type ::Murmur::Server'' then it means you use old Murmur.ice file. This happens when you try to connect using Murmur.ice from version 1.1.x to Murmur server 1.2.x, which require Murmur.ice 1.2.x. Update Murmur.ice on web server and restart it and then it should work.
  
 
===Further steps===
 
===Further steps===
Line 278: Line 262:
  
 
=== Ice <= 3.3 ===
 
=== Ice <= 3.3 ===
There's an example script using the '''Ice 3.3''' approach (defining the ice.slice directive in the PHP settings) included in the source; have a look at [http://mumble.svn.sourceforge.net/viewvc/mumble/trunk/scripts/icedemo.php?view=markup icedemo.php].
+
There's an example script using the '''Ice 3.3''' approach (defining the ice.slice directive in the PHP settings) included in the source; have a look at [[mumblegithub:/mumble/blob/1.2.4/scripts/icedemo.php]].
  
 
The establishing, minimum code, is:
 
The establishing, minimum code, is:
Line 301: Line 285:
 
= Using Glacier2 =
 
= Using Glacier2 =
  
Glacier2 is a Ice '''routing and firewall utility''', and allows you to securely run the server on one machine and murmur on another. Note that if both server and client are on a secure LAN, you can just use iptables to protect the Ice port, which is a lot easier than setting up Glacier2. Also, '''since Mumble 1.2.2 you an set an icesecret''' in your murmur.ini and use it as a password. '''This is a lot easier to set up''' and use than Glacier2.
+
Glacier2 is a Ice '''routing and firewall utility''', and allows you to securely run the server on one machine and murmur on another. Note that if both server and client are on a secure LAN, you can just use iptables to protect the Ice port, which is a lot easier than setting up Glacier2. Also, '''since Mumble 1.2.2 you can set an icesecret''' in your murmur.ini and use it as a password. '''This is a lot easier to set up''' and use than Glacier2.
  
 
The examples here assume that 1.2.3.4 is the public IP address of the server running Murmur. We're going to use the username "magic" with the password "pink".
 
The examples here assume that 1.2.3.4 is the public IP address of the server running Murmur. We're going to use the username "magic" with the password "pink".
Line 324: Line 308:
 
   glacier2router --Ice.Config=config.glacier2
 
   glacier2router --Ice.Config=config.glacier2
  
You will need to have Ice installed - http://zeroc.com/download.html glacier2router is a binary that is located in ''<location_of_Ice_installation>/bin/glacier2router.exe.''
+
You will need to have Ice installed - https://zeroc.com/downloads/ice glacier2router is a binary that is located in ''<location_of_Ice_installation>/bin/glacier2router.exe.''
  
 
== Configuring Murmur ==
 
== Configuring Murmur ==
Line 348: Line 332:
  
 
== Configuring Client (Ruby) ==
 
== Configuring Client (Ruby) ==
There is a set of classes for easily working with Ice directly and through Glacier available at [http://github.com/cheald/murmur-manager/tree/master/interfaces/ GitHub]. However, if you want to do it manually, it's not too hard.
+
There is a set of classes for easily working with Ice directly and through Glacier available at [https://github.com/cheald/murmur-manager/tree/master/interfaces/ GitHub]. However, if you want to do it manually, it's not too hard.
  
 
<pre>
 
<pre>
Line 378: Line 362:
 
2. Compile the ICE CPP bindings (these are required for all other bindings)
 
2. Compile the ICE CPP bindings (these are required for all other bindings)
 
You will need mcpp-devel from the Zeroc website installed to compile.
 
You will need mcpp-devel from the Zeroc website installed to compile.
http://www.zeroc.com/download.html - Ctrl-F and look for "mcpp-devel". There is a big package of various Ice RPMs to download. You will install a few dependencies, along with the mcpp-devel package.  
+
https://zeroc.com/downloads/ice - Ctrl-F and look for "mcpp-devel". There is a big package of various Ice RPMs to download. You will install a few dependencies, along with the mcpp-devel package.  
  
 
   cd Ice-3.3.1/cpp
 
   cd Ice-3.3.1/cpp
Line 412: Line 396:
 
To generate it for ruby, we use the slice2rb program, which is in the Ice/cpp/bin directory. Similar binaries for your language of choice will be there, too.
 
To generate it for ruby, we use the slice2rb program, which is in the Ice/cpp/bin directory. Similar binaries for your language of choice will be there, too.
  
   wget -O Murmur.ice "http://mumble.git.sourceforge.net/git/gitweb.cgi?p=mumble/mumble;a=blob_plain;f=src/murmur/Murmur.ice;hb=HEAD"
+
   wget -O Murmur.ice "https://raw.github.com/mumble-voip/mumble/master/src/murmur/Murmur.ice"
 
   ../cpp/bin/slice2rb Murmur.ice
 
   ../cpp/bin/slice2rb Murmur.ice
  
Line 421: Line 405:
  
  
[[Category:Documentation]]
 
 
[[Category:Documentation English]]
 
[[Category:Documentation English]]

Revision as of 20:13, 27 October 2019

Murmur supports remote scripting using ZeroC Ice, a RPC mechanism. There are bindings for C++, Java, .NET, Python, PHP and Ruby, and this is supported on all our platforms (Win32, Linux and OSX). Ice works locally and also over a network, meaning you can create a web application that interfaces with a Murmur process running on another machine.

Getting ready to use Ice

To enable the Ice interface in your murmur.ini configuration file for localhost on port 6502 add or uncomment:

ice="tcp -h 127.0.0.1 -p 6502"

Now restart Murmur so the change takes effect.

To check if Ice in fact does listen, on UNIX type:

netstat -apn | grep 6502

and on Windows type:

netstat -an 

and look for the process listening on port 6502.

If the port is not being listened on, check Murmurs log. It should state enabling ice on startup. If it does not, something of your configuration went wrong.

MurmurIce: Endpoint "tcp -h 127.0.0.1 -p 6502" running

End User Howtos

Note that after you have ICE set up on your machine, you can install a web interface.

How to convert Murmur.ice to Murmur.php for Ice >= 3.4.0 : http://doc.zeroc.com/display/Ice/slice2php+Command-Line+Options

How to setup Ice 3.4 for PHP with Apache on Linux (general)

If your Linux distribution offers a binary packet for Ice with PHP (usually the name contains Ice and php) you can skip everything but naming the Murmur.ice slice file in the php.ini (see below). If there is no prepared package you'll have to try to find binaries for your system or compile Ice yourself and add the extension to PHP and tell PHP where to find the Murmur.ice file.

To add the IcePHP extension to PHP, first check that the file IcePHP.so for linux is in your php extensions folder specified in your php.ini as

extension_dir = /usr/lib/php5/extensions

If it is not, get the corresponding files from ZeroC's downloads page.

Then either in your php.ini file or in your /etc/php.d or /etc/php5/conf.d folder in ice.ini, add the line

extension=IcePHP.so

At least the Linux RPMs will do this automatically, so check that you're not doing it a second time.

Second, you have to tell the PHP parser where to find the slice (Specification Language for Ice) file. Add

ice.slice = /path/to/Murmur.ice

to your php.ini or other config file (e.g. ice.ini).

Troubleshooting

If you encounter problems, check your Apache log.

If it tells you the PHP extension was compiled on an older api, you have to compile the IcePHP.so from source.

Download Ice-3.4.2.tar.gz from ZeroCs downloads page, untar, cd into PHP, as written in the INSTALL file export ICE_HOME environment variable pointing to your Ice install dir. If you installed it with an RPM, type

export ICE_HOME=/usr

then make, and in the lib folder, there'll be your IcePHP.so file.


One common error is

PHP Warning:  PHP Startup: skipping dictionary ::Murmur::UserInfoMap - unsupported key type in Unknown on line 0

This is caused because the .ice is slightly incompatible with older versions of php-ice - edit the Murmur.ice file and find the following lines

/** User information map.
* Older versions of ice-php can't handle enums as keys. If you are using one of these, replace 'UserInfo' with 'byte'.
*/

and perform the substitution mentioned.

How to Setup Ice for PHP with Apache on Debian/Ubuntu

Note: For the PHP Ice, there are major differences between the Ice versions 3.3 and 3.4. In more detail: 3.3 uses .ice definition files while 3.4 uses compiled/converted PHP files.

Thus, depending on the version you are installing, you will have to follow different configuration steps.

At the moment [2012.05.06], the current Debian stable is squeeze, for which the official repositories provide version the Ice 3.3. For Ubuntu on the other hand, the current stable version 12.04 (LTS) provides Ice 3.4 in its repositories. So make sure you follow the matching instructions.

Short, expert version:

  • If php-zeroc-ice version >= 3.4: apt-get install php-zeroc-ice, then add /usr/share/Ice-3.4.2/php/lib to your PHPs include path.
  • If php-zeroc-ice version <= 3.3: apt-get install php-zeroc-ice, then add the ice.slice parameter to with value <pathto>/murmur.ice to your PHPs configuration.


For the following guide, a set up Apache2 and PHP environment, and a working install of Murmur is assumed.


Step 1 - PHP Ice extension

First we need to install the Ice library for PHP. Execute the following in a root shell:

apt-get update

apt-get install php-zeroc-ice


Step 2 - PHP Setup

Now we need to tell PHP to load the IcePHP extension. Open the file /etc/php5/apache2/php.ini for editing:

vim /etc/php5/apache2/php.ini

OR:

nano -w /etc/php5/apache2/php.ini

Paste the folowing in the dynamic extensions section of the file:

extension=IcePHP.so 


Step 3 - Reload and Check

Everything should be set up so let's restart the servers so they load the updated config files.

Restart your Apache2 daemon:

/etc/init.d/apache2 restart

Make a file named phpinfo.php in your web root and paste the following:

<?php phpinfo(); ?>

Open the page in your browser, you should be greeted with PHP's information page. Search the page for "Ice version" to verify that the IcePHP extension has loaded. If you don't see IcePHP's version and config info on this page, verify that the file IcePHP.so exists in PHP's extension_dir (this will also be in your PHP info page). Once you're sure that the IcePHP extension has loaded, delete the phpinfo.php file for security reasons.

Now we will take a look in the mumble-server log to see if Murmur's Ice interface is listening:

tail -n10 /var/log/mumble-server/mumble-server.log

If you find a line similar to the following everything is fine and you can now communicate to Murmur via its Ice interface.

...
<W>2012-03-24 13:37:11.316 MurmurIce: Endpoint "tcp -h 127.0.0.1 -p 6502" running
...

Step 4 - Setting up Murmur to provide Ice interface

Now open the file /etc/mumble-server.ini for editing:

vim /etc/mumble-server.ini

OR:

nano -w /etc/mumble-server.ini 

Comment the following line to disable DBus:

#dbus=system

Uncomment or paste the following line to enable the Ice interface:

ice="tcp -h 127.0.0.1 -p 6502"

Restart your Mumble server:

/etc/init.d/mumble-server restart

After restarting the daemon Murmur will now listen for Ice requests.


Now you can install and use any of the PHP based 3rd Party Applications compatible with IcePHP version 3.4.

How to setup Ice for PHP with Apache on Windows

These are example scripts. Use at your own risk. These scripts are not intended for production machines. These are examples of what Ice can do. Note that if you already have a web server installed on the server you can adapt this guide to use it instead of installing Apache.

First install Apache. Install it to C:\apache\.

Now install PHP. Tell PHP to install to C:\PHP5\. In the installer on the "Web Server Setup" window select Apache 2.2.x Module. When you get to "Select Apache Configuration Directory" put C:\apache\conf\. Proceed through the installer. Install the defaults, you do not need to install the extensions for PHP.

Now download and install Ice-x.x.x-VC60.msi. Go to C:\Ice-3.3.1-VC60\bin\ and copy

bzip2.dll 
ice33.dll 
iceutil33.dll 
msvcp60.dll 
msvcrt.dll 
php_ice.dll 
slice33.dll 
stlport_vc646.dll 

to C:\apache\bin . Now open C:\PHP5\php.ini and add the following two lines to the bottom of the file:

extension=php_ice.dll
ice.slice=C:\PHP5\Murmur.ice

Now save and exit php.ini.

After you have done all that, download Murmur.ice, icedemo.php, and weblist.php (Click the links, and on the Sourceforge page right click on "(download)" and select "Save Link As...".) Put Murmur.ice in C:\PHP5. Put icedemo.php and weblist.php in C:\apache\htdocs.

Double click the Apache icon in the system tray and select "Restart".

You now need at least one running Murmur server. Go to C:\Program Files\Mumble and double click murmur.exe and the server will start.

You should now be able to go to http://<your IP or Domain>/icedemo.php (or weblist.php). Make SURE that you have icedemo.php protected so that only YOU can access it. If you do not want to use icedemo.php, here is a list of other web interfaces you can use.

How to setup Ice for PHP with XAMPP on Windows

pre Setup

Download and install the following packages:

Now configure and start XAMMP.

Create developer environment for Windows

  • Open System in Control Panel ( On Windows VISTA/7 Systems select advanced )
  • On the Advanced tab, click Environment Variables
  • Add the Ice Path to %PATH%

Select the name PATH on user variables and edit. If the name PATH does not exist, select new. Enter now the PATH to your Ice installation dir.

Sample for 32Bit:

%PROGRAMFILES%\ZeroC\Ice-3.4.0\bin;%PATH%

Sample for Windows x64:

%PROGRAMFILES(x86)%\ZeroC\Ice-3.4.0\bin;%PATH%

Now logout from Windows or restart. After reboot check if included Ice in our environment. Open the CMD and try

slice2php

The Output return the slice2php help. If not check http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/environment_variables.mspx?mfr=true

Configure XAMPP/PHP

Copy the File php_ice.dll from <your path>\ZeroC\Ice-3.4.0\bin to <your_path>\xampplite\php\ext Edit the php.ini in <your_path>\xampplite\php and add

extension=php_ice.dll
ice.slice=<mumble_path>\Murmur.ice

Now start XAMMP and check the phpinfo().

Using different ice.slice on same host

Sometimes you run two servers of mumble on the same host and you cannot load two slices with different mumble versions on the same time. The solution is to use ICE profiles, that will require extra files and unfortunately modification of scripts that run the default profile. Description on Debian etch with apache2, PHP as fcgid and cli.

Creating profiles

  • Lets create profile directory (as root/superuser user), I have created mine at
/etc/php5/ice/
  • Then create directories per profile (it will make life easier later)
/etc/php5/ice/murmur.1.1.x
/etc/php5/ice/murmur.1.2.x
  • To each of the corresponding directory I have placed the Murmur.ice file provided with the installs. You will notice that later upgrades will just consist of copying new files (instead of renaming).
  • time to make profiles.ini file that ICE will use:
vi /etc/php5/ice/profiles.ini
  • Insert there below code:
[Murmur11x]
slice=/etc/php5/ice/murmur.1.1.x/Murmur.ice

[Murmur12x]
slice=/etc/php5/ice/murmur.1.2.x/Murmur.ice
  • This way you got two profiles, first (Murmur11x) is loading slice file for older murmur setups, and the other (Murmurm12x) loads newer slices. Below example of directory structure:
/etc/php5/ice
|-- murmur.1.1.x
|   `-- Murmur.ice
|-- murmur.1.2.x
|   `-- Murmur.ice
`-- profiles.ini

IcePHP.ini

  • Now time to alter /etc/php5/cgi/conf.d/IcePHP.ini, so it will look like this
extension = IcePHP.so
ice.profiles=/etc/php5/ice/profiles.ini
  • Notice that we are adding ice.profile setting, so that ice knows where to search for profiles.
  • Default profile is named __default__ and you better avoid to make it.
  • I got no idea about setting up default ice.slice entry (experience told me to force editing php files anyway, read below)

Changing PHP scripts

  • Next alter the source code of the php scripts you use. It consists of just altering the one function that tells ICE to load profile. By default the function is ran without parameter, and it looks like below:
Ice_loadProfile();
  • Now we will tell that function to load specific profile that it was designed for. Below example modifications to load different profiles for given ice profile:

for older mumble:

Ice_loadProfile('Murmur11x'); // load profile for scripts that talk with murmur 1.1.x

or for new mumble:

Ice_loadProfile('Murmur12x'); // load profile for scripts that talk with murmur 1.2.x
  • Notice that single quotes are required.

Checking out if it works

  • Remember to restart apache (your configuration may require it)
  • See php/apache error logs when something goes wrong.
  • If you get error like unknown operation getUsers invoked on proxy of type ::Murmur::Server then it means you use old Murmur.ice file. This happens when you try to connect using Murmur.ice from version 1.1.x to Murmur server 1.2.x, which require Murmur.ice 1.2.x. Update Murmur.ice on web server and restart it and then it should work.

Further steps

  • I suggest you do the same with /etc/php5/cli/conf.d file and scripts that you run from console (crontab)
  • Altering php.ini error_reporting is advised to disable generating massive amount of warning messages:
error_reporting = E_ALL & ~E_NOTICE & ~E_WARNING

Developing for the Murmur Ice interface

How to use Ice differs from language to language. The parameters and method names will remain the same, but the syntax will naturally be different. Murmur will, by default, open up an adapter on port 6502 (or 10000 for homedir installs), which has a single accessible object named "Meta". This is the Meta server, and from it you can retrieve adapters for any configured server.

The ice interface is fully documented, and you can browse the generated documentation.

PHP

With IcePHP establishing the connection to the interface differs between the Ice versions 3.3 and prior and 3.4 and later.

Ice <= 3.3

There's an example script using the Ice 3.3 approach (defining the ice.slice directive in the PHP settings) included in the source; have a look at mumblegithub:/mumble/blob/1.2.4/scripts/icedemo.php.

The establishing, minimum code, is:

Ice_loadProfile();
// initialize ice connection
global $ICE;
$base = $ICE->stringToProxy('Meta:tcp -h 127.0.0.1 -p 6502');
$meta = $base->ice_checkedCast("::Murmur::Meta");

Ice >= 3.4

For Ice 3.4 and later you’ll have to do a different approach.

First, you’ll have to generate PHP code from the slice definitions .ice file. >=Ice 3.4 installed, use the slice2php executable to generate it.

For your PHP code, you’ll have to have the Ice.php and other libs (scripts provided by zeroc) in your PHPs include path to include them.

require_once 'Ice.php';
require_once 'Murmur.php';
$ICE = Ice_initialize();
$meta = Murmur_MetaPrxHelper::checkedCast($ICE->stringToProxy('Meta:tcp -h 127.0.0.1 -p 6502'));

Where Murmur.php is the generated file.

Using Glacier2

Glacier2 is a Ice routing and firewall utility, and allows you to securely run the server on one machine and murmur on another. Note that if both server and client are on a secure LAN, you can just use iptables to protect the Ice port, which is a lot easier than setting up Glacier2. Also, since Mumble 1.2.2 you can set an icesecret in your murmur.ini and use it as a password. This is a lot easier to set up and use than Glacier2.

The examples here assume that 1.2.3.4 is the public IP address of the server running Murmur. We're going to use the username "magic" with the password "pink".

Configuring Glacier2

Create a config file called config.glacier2 and put the following in it:

 Glacier2.Client.Endpoints=tcp -h 1.2.3.4 -p 4063
 Glacier2.SessionTimeout=60
 Glacier2.CryptPasswords=passwords.txt

Your endpoint host should be the public IP that you are running Glacier on. If you don't specify a client via -h, then Glacier will bind to all listening interfaces.

Then, create a password hash using the OpenSSL utility.

 openssl passwd pink

this will spit out a hash, which looks something like CTThafhdv9Lz2

Create a file called passwords.txt containing:

 magic CTThafhdv9Lz2

Start glacier2 as this:

 glacier2router --Ice.Config=config.glacier2

You will need to have Ice installed - https://zeroc.com/downloads/ice glacier2router is a binary that is located in <location_of_Ice_installation>/bin/glacier2router.exe.

Configuring Murmur

There's nothing to do in murmur. Seriously. Leave the default setting of binding to 127.0.0.1 alone.

Configuring Client (PHP)

This is where it starts getting slightly ugly. Note that this requires Ice >= 3.3.1, as Ice 3.3.0 has a bug in it which prevents this from working. The following is the adaptation necessary to weblist.php to get it to work:

try {
  $router = $ICE->stringToProxy("Glacier2/router:tcp -p 4063 -h 1.2.3.4");
  $router = $router->ice_uncheckedCast("::Glacier2::Router")->ice_router(null);
  $session = $router->createSession("magic", "pink");
  $base = $ICE->stringToProxy("Meta:tcp -h 127.0.0.1 -p 6502")->ice_router($router);
  $meta = $base->ice_checkedCast("::Murmur::Meta")->ice_router($router);

  ...

For each object you get a proxy to (including the return from $meta->getServer), you need to add ->ice_router($router)

Configuring Client (Ruby)

There is a set of classes for easily working with Ice directly and through Glacier available at GitHub. However, if you want to do it manually, it's not too hard.

glacierHost = "yourhost.com"
glacierPort = 1234
user = "glacieruser"
pass = "glacierpass"
server_id = 1

prx = ic.stringToProxy("Glacier2/router:tcp -h #{glacierHost} -p #{glacierPort}")
router = ::Glacier2::RouterPrx::uncheckedCast(prx).ice_router(nil)
router.createSession(user, pass)
meta = Murmur::MetaPrx::checkedCast(ic.stringToProxy("Meta:tcp -h #{host} -p #{port}")).ice_router(router)
server = meta.getServer(server_id).ice_router(router)

For each object you get a proxy to (including the return from Murmur::MetaPrx::getServer), you need to add #ice_router(router)

Compiling Ice

On some platforms there are no officially supported binaries available. In that case you will either have to change your platform or compile Ice yourself.

Building Ice on Redhat/CentOS machines

Note: 3.3.1 is no longer the current version of Ice. Feel free to try this guide with the new version and update it if it works, or fix it if it does not.

1. Download and unpack ICE

 wget http://www.zeroc.com/download/Ice/3.3/Ice-3.3.1.tar.gz
 tar -xzf Ice-3.3.1.tar.gz

2. Compile the ICE CPP bindings (these are required for all other bindings) You will need mcpp-devel from the Zeroc website installed to compile. https://zeroc.com/downloads/ice - Ctrl-F and look for "mcpp-devel". There is a big package of various Ice RPMs to download. You will install a few dependencies, along with the mcpp-devel package.

 cd Ice-3.3.1/cpp
 make

(wait 20 minutes)

 sudo make install

3. Compile and install the Ice bindings for your preferred language. For example, to install Ruby bindings:

 cd ../rb
 make
 sudo make install

4. Export the paths for your newly-installed libraries. These will be different for each language - check the INSTALL or README files in each language's subdirectory for exact instructions.

For Ruby:

 export RUBYLIB=/opt/Ice-3.3.1/ruby:$RUBYLIB
 export LD_LIBRARY_PATH=/opt/Ice-3.3.1/lib:LD_LIBRARY_PATH

If you don't want to always have to keep running those export lines, also add them to your ~/.bashrc:

 export RUBYLIB=/opt/Ice-3.3.1/ruby:$RUBYLIB
 export LD_LIBRARY_PATH=/opt/Ice-3.3.1/lib:LD_LIBRARY_PATH

4. At this point, Ice should be available to your language (in this case, Ruby):

 $ irb
 irb(main):001:0> require 'Ice'
 => true

5. Generate the Slice file for your language.

To generate it for ruby, we use the slice2rb program, which is in the Ice/cpp/bin directory. Similar binaries for your language of choice will be there, too.

 wget -O Murmur.ice "https://raw.github.com/mumble-voip/mumble/master/src/murmur/Murmur.ice"
 ../cpp/bin/slice2rb Murmur.ice
 cp Murmur.rb #{MANAGER_ROOT}/vendor/ice

Congrats! Ice should be set up and fully functional.