Please edit this page if you find a feature or step you think should be included; it's a wiki for a reason! Note you must register and wait about 3 days in order to be able to edit.
- 1 Setting Up a Murmur Server
- 1.1 Preparations
- 1.2 Setting Up Server
- 1.2.1 Setting SuperUser Password
- 1.2.2 Configuring ini File
- 1.2.3 Regular Expressions
- 1.2.4 Starting Murmur
- 1.2.5 Connecting to Murmur Server
- 1.2.6 Becoming Administrator and Registering a User
- 1.2.7 Permissions
- 1.3 Server Configuration Methods
Setting Up a Murmur Server
Note that the instructions of this guide are Windows based, but all of the instructions should be adaptable to Linux. Once your IP is made static, and you get Murmur started, its ini configured, and its port is cleared through whatever firewalls are present, the setup is mostly client-side.
Always remember that there are professional Mumble server hosters. Simply Googling "mumble server hosting" will come up with many excellent, reliable hosts that offer servers at a very cheap price.
If you have any questions, that you cannot find answers to on this page, check the FAQ.
Before you can have Murmur completely working, you need to make a few changes to your network on Windows.
First, make your IP static. Unless you're just going to run this server a few times, or it is a LAN server only to be found via Bonjour, you need to make your IP static so that a person outside of your network can dependably connect to your Murmur server. If you have no idea how to make your IP static, read this guide for doing in on Windows XP, and this guide for doing it on Windows Vista.
Generally, the config file for setting a static IP involves either using your distro's GUI network tool or editing configuration files (for example, /etc/network/interfaces). It is recommended that you Google for instructions to set a static IP for your specific distribution. Generally something like "Ubuntu static IP" will get what you need.
Now you need to open a port on your computer and/or networking equipment. This port will be the port that Murmur runs on, and the default is 64738 (using the TCP and UDP protocols). If you wish to use a port different than this one, use it instead of port 64738 used in this example. If you are just using Windows' built-in firewall then when you start Murmur it should ask whether or not to allow it. If you are using a third-party software firewall you will need to find the instructions for opening a port on it on your own. To learn how to open the port on your network equipment, we recommend you go to Portforward and select your specific devices from the list. Though Murmur is not currently on the Portforward website, just use some other program in place of it (for instance read the instructions for opening the ports for Call of Duty) but only open the port you want to use for Murmur, ensuring that you are using both TCP and UDP for the port. Remember that ANY device with a firewall between you and the internet must allow the port you are going to use for Murmur on both the TCP and UDP protocols. That means your [wireless] router, Cable or DSL modem, and anything else that has a firewall.
Note that if your network seems to have the port forwarded completely, and you still cannot connect, you may still have some hidden software firewall blocking the port on your server. Check very carefully to make sure you do not.
Now you need to install Murmur. Download the latest stable Win32 release here. Start the installation, and when you come to the installation selection, select at least the Murmur server. You can choose to install Mumble and Bonjour if you want, but it is not a requirement. Once you have it installed, it is recommended that you make a shortcut to it in order to easily start it. Go to C:\Program Files\Mumble (or wherever you installed Murmur to), right click on murmur.exe and click "Create Shortcut." Find the shortcut (it will be in the same folder as murmur.exe), right click it, and click "Rename." Type "Murmur" (without the quotes) and press enter. Now drag the Murmur icon onto your desktop.
Windows Server users note: you may have an old murmur.sqlite database if you are upgrading to 1.2.0. Mumble may not remove this database on installation, so unless you want to keep it, you can delete it at C:\Users\<username>\murmur.sqlite.
For nearly all Linux distributions, you can simply use the static binary. However, if your specific distribution supports Murmur (such as Ubuntu), you should look into using the specific packages for it.
Setting Up Server
Setting SuperUser Password
You must set the SuperUser password before you start Murmur.
The first basic step before you start your Murmur server is setting a SuperUser password. The SuperUser is the first user on your Murmur server, and it is vital to initially adding a user to the admin group, and as a backup measure in case something goes terribly wrong with the server (say, it has been hacked).
To set the SuperUser password, press the Windows key and hold it down (it's right between left control and right control) and then press the R key. In the input box of the window that pops up, type cmd and press enter. Now type
and press enter. If you installed Murmur to a folder different from this, you need to cd to wherever you decided to install it to.
After you have done that, type
murmur.exe -supw Password_of_your_choice
(Password_of_your_choice being whatever password you want to give SuperUser) and press enter. A window should pop up that says something like "Superuser password set on server1." Note that this does not start the Murmur server, it only sets the SuperUser password.
If you're using the static binary, CD to where you extracted it, CHMOD it properly, then do
./murmur.x86 -supw Password_of_your_choice
Configuring ini File
In C:\Program Files\Mumble (or wherever you installed Mumble to) there is a file called murmur.ini this contains all the basic settings for Murmur. If you change any of the settings in this ini file, you have to restart Murmur for the changes to apply. It is suggested that you look over and/or configure the lines that start with the following:
welcometext= port= serverpassword= bandwidth= users= registerName=
You do not need to change any of these fields for your server to work, but you should change them if you need to. For instance if you do not want your server to be public (that is, any user of Mumble has the potential to enter it) you should set
(Password_of_your_choice being whatever you want your server password to be.) Uncomment
(change it to)
and set it. This line sets the name of the Root channel of your Murmur server. It is the top channel of the server and if you do not set it, it will have a name of "Root." For instance if you wanted to name the server "FPS Fun" you would set the line to
Do not fill out the other
fields or uncomment them if you are going to have a server password set. If you want it to be public you must leave
blank and you must set the following lines with the proper information and remove the # from them. (# at the beginning of a line comments the entire line, telling the program that reads it to completely ingore the line.) The lines below register the server with the central Mumble server list and make it so that one who browses the servers on the "Server Browser" tab of the connect window can see your server. Read the commented lines in the ini for specific information about these three lines.
#registerName= #registerPassword= #registerUrl=
line is optional and only set it if you have an external static IP. If you are on a home-based DSL or Cable network, you probably should not set this field.
Carefully read the commented text in the ini file for explanations of each of the ini settings you wish to change or set.
If you want to use a character that the server does not allow, you need to use regular expressions. These are, in themselves, rather complex, but for Mumble, you don't need to learn them. Here's a quick guide to regular expressions:
If you want to use the character "%" in a channel name, then uncomment this line in Murmur.ini:
so that it is
then add the character, which will make it look like this:
See? It's easy. You just add each character that you want, putting \\ between each character.
If you want to add the ability for users to use spaces in their username, then uncomment this line
so that it is
then make it look like this:
(See the space at the very beginning, right after the [ ?)
Once you have configured the .ini file to your liking and are ready to start Murmur, start it by double clicking the Murmur icon you put on your desktop. The server should start and you should see a little icon similar to Mumble's in your system tray (the little icons in the bottom right corner of your screen). You can right click this icon and select either "Show Log" to view the log that Murmur generates (users that connect, settings initialized, etc.) or "Quit Murmur" to shut down the Murmur server. If you want Murmur to automatically start with Windows, select the Murmur icon, right click it, and click "Copy." Now right click on your start button, select "Open All Users" and open "Programs\Startup." Right click in an empty space and select "Paste." Now Murmur should start with Windows.
If you are using the static binary, simply CD to wherever you extracted it, chmod it, and then do
If you are using a package for your distribution, the command is usually
However, most packages will automatically start from init.d; you should check to make sure yours does not before manually starting it. For Debian-based distributions, you should use the PPA repository found here: https://launchpad.net/~slicer/+archive/ppa and then use the following commands:
sudo apt-get update sudo apt-get install mumble-server sudo dpkg-reconfigure mumble-server
after that, Mumble should be running. The config file for Mumble on Debian-based systems should be at /etc/mumble-server.ini.
Connecting to Murmur Server
Now that Murmur is started, start Mumble. When it is started, click the Add New... button. Then fill the fields with your servers information.
The Servername field contains the name that will be displayed in your server list.
The Address field is the external IP of your server; if you do not know the external IP, go here (from the computer hosting Murmur): http://whatismyipaddress.com/ ; or your servers bonjour name (prefixed with @). Your external IP is never 192.168.x.x
The Username field takes your users Name. Be aware that names are case sensitive. If you want to connect as SuperUser mind the capitalization. Since you are going to want to add your user as an admin, put in that username for now.
Note that in contrast to 1.1.8 there is no password field. This is because 1.2.0 relies on certificate authentication. If for some reason a password is needed the client will present you with a prompt.
Becoming Administrator and Registering a User
In 1.2.0 you don't need any 3rd party scripts, servers, or programs to add a user. First, you probably want to become a member of the administrator group.
Note that as an administrator, you can manage the registered users by going to Server -> Registered Users.
Becoming an admin:
- Start the Mumble client.
- Go through the Certificate Wizard and either import or create a certificate. You can skip the Audio Wizard if you want, although you will need to run through it in order to set up your mic properly, so you might want to do that anyway.
- Open Configure -> Settings and check "Advanced" at the bottom left.
- Join your server following the previous step
- When you are connected to the server, right click on your username, and then click "Register" - if you do not see this option, ensure that you have an @all ACL that has "Register Self" set to Allow, Applies to sub-channels unchecked.
- Reconnect as the SuperUser - Go back to your server list, and on the main Mumble window click Server -> Connect. You will see the server you added in the previous step. Right click it and select "Edit..." Change Username to SuperUser, click OK, then click Connect.
- Right click the "Root" Channel (it will be above your username; it will be whatever you named it if you set the registerName in Murmur.ini) and click Edit.
- Go to the Groups tab
- In the drop-down box at the top select the "admin" group
- In the "Members" drop-down box at the bottom left, type your username and press enter
- Click OK
- Follow step 3 to change your username back to the user you added with SuperUser
- Connect back to the server
- Test your administration ability by right clicking the root channel, clicking Add, and adding a new channel
The default settings allow users to register themselves. This can be disabled within the ACLs. Members of the admin group can always right click->Register a user to register them manually. Note that this only works if the user provided a certificate (meaning that they have completed the certificate wizard).
Make sure that you instruct everyone on your server to back up their certificate. The certificate wizard forces you to do this, but you should always back it up to a secure storage medium like a flash drive, your email inbox, or any external storage medium. If you ever lose your certificate, you will have to re-register and be manually added back into all your various ACLs!
If you want to learn more about ACLs see this guide.
Note that you must have Advanced Config checked at Configure -> Settings in order to see the ACL tab for a channel.
Many people have complained about the complexity of ACLs - that they are complicated, hard, and cumbersome. They are none of these if used correctly. You see, the ACLs can be as complicated as you want. It is basically a full permissions suite similar to what you would deal with on an Apache server. But it doesn't have to be that complicated!
Do you know what ACL means? Access Control List. That is all. An ACL simply defines where and what a "Group" can do. A Group is simply a bunch of users defined by a name. That is all.
Here is a basic guide that you can use to create the most essential permissions for your server:
Ok. You have made one admin so far. If you want to add another admin, the other person you know must register himself. After that, you can open the ACL editor and add him in the same way that you used SuperUser to add yourself.
But now you want to make a channel that only certain people can get in. Very simple.
- Make sure that everyone you want to add is registered with the server
- Make the channel for the people who want it (for this example, make an MMO channel)
- Right click on the root channel, click "Edit", then go to the Groups tab
- Click, in the empty box at the top, and type the name of the group you want to add. For example, if you wanted to make a channel for MMO players, you might name your group "MMOplayers." Type that into the box and press enter. A new group has been made.
- Now you need to add members to this group. In the box at the bottom left, type a member name and press enter after each name. The names that you add should appear in the box above the input box.
Finally, you need to create an ACL for the channel. Close the current window, and then right click on the MMO channel and select Edit. Click the ACL tab.
- Here is where it appears to become complicated, when in fact it is not at all. What you first see is inherited ACLs. All inherited means is that the permissions of the above channel are automatically applied to this one. Since we don't want that, uncheck "Inherit ACLs."
- Now if you just left it like it is now, then the @all permissions would be in effect for this channel. Anyone who went into this channel (except for those in the admin group; they override this) would have the permissions you see at the right.
- But we want to make some ACLs. Start off by adding an "@all." Just click "Add" and it will be created. By default, the Group will be all. All the @ means is "apply to." For this group, you probably just want to set "Deny" for all the permissions. However, you don't have to manually click "Deny" on everything. The group that is defined before it, the "@all" in italics, already has set permissions. For example, it defaults to deny "Write ACL." So, in the "@all" ACL below it, if you don't check either "Deny" or "Allow" and it will default to "Deny." Also note that lower ACLs take priority over ones above them. For instance, you can make an @all that denies permissions for everything, and make an @all below that one, that allows permissions for everything, and everyone in the server will be given administrator-level access to the server.
- Now click "Add" again. However, this time you need to click the "Group" box at the bottom left. Delete the "all" text from there and type MMOplayers, then press enter.
- Now you need to define what exactly MMOPlayers can do. The recommended settings would probably be "Allow" on all the permissions except for "Write ACL" and "Make channel"; those two permissions should be set to "Deny".
- Now only people in the MMOplayers group should be able to join the channel (and those in the admin group, of course).
Another nice feature of Mumble 1.2.0 is Access Tokens. These are what you could call passwords; basically, if you have a token that is the same name as the channel's ACL Access Token group, you can enter the channel. Think of Access Tokens as groups where you can add yourself to the group if you know the "password" (token).
- Go to Server -> Access Tokens and add a token.
- Add an ACL for a channel you want to give permissions to. Do exactly the same as you would with a normal ACL, but when you assign a group for the ACL, type #TOKEN_NAME (TOKEN_NAME being the name of the token that you added in the above step).
- Now each individual user can click themselves, click Server -> Access Tokens, and add the tokens for the channels they want to enter. Remember, channel owners should only give out the token name to those they want to enter their channel, and it is best to pick a unique, hard-to-guess name for your token.
Server Configuration Methods
As of Mumble 1.2.0, nearly all administration tasks can be handled directly through the client. However, if you are a dedicated server hoster, you will probably want to start virtual servers, and have some way of configuring and applying the murmur.ini parameters without having to shut down Murmur. See below for more information.
Remote Controlling the Server
For a 3rd party application there are two methods, Ice and DBus, to interact with the server. These can be used from a variety of programming languages and give you low-level access to a lot of functionality.
If you just want to use a web-interface, you can find a list of them here.
This is not a required step in this guide.